The use of this technology, you can of digital and analog sensors measuring parts of the program search order. In addition, the amended order of command and communication components can be used to implement the amendments to the program, these applications not only in the measurement of the robot, as well as amendments to the structure through the use of serial transmission processing in the second robot. KUKA.LaserCut Laser Cutting Technology: KUKA.LaserCut installed, you can use to provide additional commands. These commands support the use of laser programmer function to program the robot program. Be supported are: the laser switching orders, distance sensors, control, pressure settings, as well as programming a simple geometry. KUKA.LaserWeld Is a KUKA.LaserWeld kuka

robot for laser welding of the modular structure of operations, time-saving and user-friendly programming support package. You can use the Intranet to facilitate the operation and parameters of the form table, so that the input parameters, settings, and change can be easily completed. In addition to the application of laser welding functions, KUKA.LaserWeld also provided a separate configuration program to generate and support a variety of application modules. Laser welding system will be integrated into the robot kuka KR C2 control system, the convenience of all the important functions of the programming. KUKA.GlueTech KUKA.GlueTech Feature Pack is used to control a variety of adhesion control system. According to the application of the bonding of different control systems, prepared to choose ready-made features such as a simple adhesive guns turned on or off, check the amount of coating of adhesive, etc.. In order to enable simple, these functions will be the form of dialogue for the use of programmers. Configuration tools to support rapid access to production equipment. For example, the tool provides the necessary input / output configuration, or stick joints form a specific input parameters. KUKA.ArcTech KUKA.ArcTech is a function of welding technology package, is used to control by the control of its power program. The Feature Pack is designed for cooperation in the operation of the robot designed, which allows a maximum of 3 robots communicate with each other while working. The Feature Pack is easy to operate with remarkable characteristics: configuration tool makes a very simple set up. Large number of teaching to facilitate the operation and simulation models, and include information on the causes, including those with the matter in detail because the relevant information, will support the safe operation and co-operation (Shared Pendant). The Feature Pack and all of its features easy-to-use applications are also available for single customers. KUKA.PalletTech Applied to the program from a shortcut. The wisdom of stacking pallets and KUKA.PalletTech ® software robot kuka KR C2 control system to ensure that your application can be implemented quickly and efficiently. As a second generation of personal computer control system of the robot, the software provides customers with more freedom and more functions. It can be used to control the entire production line can be integrated through a bus at the scene to a higher level control system structure. In addition, the software also provides connectivity to all common interface for connecting clip, visual equipment as well as the induction system. Can be easily programmed through the Windows user interface and new software "Icon Editor" to carry out, which allows users to intuitive programming and operation symbols.